PuLS Electronic Load

The PuLS can perform load testing on DC/DC converters with a waveform specified in the PC software PuLS Control. It can be configured via USB or PMBUS, when using it in USB mode (address 0) it will act as a virtual COM port against the PC. The current PC software allows the user to set three amplitude levels between 0.5 - 45 A, each with a duration between 10 us – 9999 us. The voltage range for the device is up to 20 V. The PuLS has built in temperature trigger circuit which will shut it off if the temperature exceeds 92°C.

Additional Resources

Technical Specifications
PuLS Technical Specification
User Guides
PuLS User Guide

Stay in touch